Utiform Master Plastering Machine

• Three phase mixing pump for interior and exterior
coatings (gypsum, mortar, render)
• Simple and robust.
• Can be filled with premixed material from bags or
from silos.
• Horizontal material feeding, avoiding desagregation of
materials.
• The pump transports the mix through hoses to the spray gun, where with help of compressed air, the material is sprayed on the surface.
• Cylindrical mixing tube with "guillotine" closing system.
• Special designed electric box with automatic shut off
system for pump and compressor.
• Holders for accesories and tools.
• In case of loss of water pressure the machine is switched off automatically.
• Sealed electric box to avoid damage by dust or water.
• The correct turning direction is guaranteed by a two
direction switch on the electric board.
• Perfect water dosification and regulation with flow meter to guarantee continous mix.
• For special applications the machine can be equipped with a cable remote control.
• Easy to use due to ergonomic design.
• Easy to clean and maintain.
• For easy transportation between floors on site the machine can be taken to parts within minutes.
• Big toolbox for tools.
• Machine with 4 wheels for easy transport on site.
• Low filling height.

• Automatic shut off system.
• Compressor 250 l/min.
• Water Pump.
• Tool and Cleaning Kit.
• Spray Gun.
• Mixing shaft.
• Warranty Certificate.
• CE Certificate.
• Parts book and manual.
• Tool Kit (spanners).

• Stator / Rotor.
• 10 m mortar hose Dn 25 mm.
• 10 m air hose 3/8"
• 5 m water hose 3/4" + suction valve
• 25 m electric cable 5x2'5 mm2