Utiform V1 Utiform V3

Utiform V2 Plastering Machine
View Full-Size Image

Utiform V2 Plastering Machine

Price per Unit (piece): Call for Pricing

Ask a question about this product

Utiform V2 Plastering MachineCharacteristics

• Rendering machine for one coat render, traditional mortar and all sorts of premixed mortar.
• Ideal for cement based renders, one coat renders, repair mortars and traditional mortars.
• Forward - Backward drive of the pump for easy cleaning and avoid material blockages.
• Large radiator with cooling unit to avoid heating of the motor and hidraulics.
• Three cylinder 21 HP water cooled engine for best performance even in dificult circumstances. Low noise level and low consumption.
• The pneumatic remote control at the spray gun, that stops the pump and lowers the revolutions of the motor makes the machine even more confortable.
• Max. grain size 6mm.
• Equipped with stator and rotor 2L6 with an output up to 3,6 m3/h.
• Can be used for small quantities of self levelling floor material.
• Excelent towing performance due to low gravity point.
• The serial remote control allows to start and stop the machine from any point during the working process.
• Uniform spray due to 375 l/min two cylinder compressor.

Standard equipment:

• Towable.
• Air compressor 375 I/6 bar.
• Stator + Rotor.
• Electric control panel.
• Tools and cleaning kit.
• Warranty certificate.
• CE certificate.
• Instructions manual and partsbook.

Recommended equipment:

• 2 x 15 m mortar hose 35 mm
• 1 x 5 m mortar hose 25 mm
• 1 x 15 m air hose.
• 1 x 20 m air hose.
• Spray gun.

Technical data :
Motor Diesel Electrical
Plaster conveying capacity 0-60 l/min * 0-60 l/min *
Max. grain size 2L6 - 6 mm
Triple plus- 8 mm
2L6 - 6 mm
Triple plus- 8 mm
Conveying height 40-50 m 40-50 m
Conveying distance 80-100 m 80-100 m
Weight 750 Kg 750 Kg
Size LxWxH (mm) 3300 x 1150 x 1200 3300 x 1150 x 1200
Loading height 1150 mm 1150 mm

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.